BS3464 Metal Sluice Seat Gate Valve

BS3464 Metal Sluice Seat Gate Valve

Product Description

Sluice Gate Valve| BS CAST IRON NON-RISING STEM,METAL SEATED,GATE VALVE BS3464 PN16

What are Sluice Gate Valves?

The sluice gate valve is a true end-of-pipe valve, designed to return water with minimal leakage from the drain pipe to the sewage tank to the distribution box; the gate is a true end-of-pipe valve, with the smallest leakage in various applications The back and forth water flows from the drain pipe to the sewage tank and then to the distribution tank.

Sluice Gate Valves features

1. Nodular cast iron design.

Contrary to manufacturing parts, our castings are less likely to fail over time.

2. Independent assembly.

Our unique assembly does not require guide rails to guide the disc, so installation is easy.

3. High fixed pressure tolerance.

Since the rated pressure of the gate is 50psi, its gate performance is better than the industry standard. Each gate is designed with finite element analysis function, which can measure stress and deflection based on seating, non-fixed and other external loads, so that the gate has the highest reliability

评论

发表评论

此博客中的热门博文

What is Gate valves

图片
  What is Gate valves Gate valves  are widely used for all types of applications and are suitable for both above-ground and underground installation. Not least for underground installations it is paramount to choose the right type of valve to avoid high replacement costs. Gate valves are used to shut off the flow of liquids rather than for flow regulation. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low flow resistance. The size of the open flow path generally varies in a nonlinear manner as the gate is moved. This means that the flow rate does not change evenly with stem travel. Depending on the construction, a partially open gate can vibrate from the fluid flow Gate valves are mostly used with larger pipe diameters (from 2" to the largest pipelines) since they are less complex to construct than other types of valves in large sizes. Gate Valve Parts Main gate valve parts of a gate valve are: body, seat, gate, stem, bonnet and act
阅读全文

Why Does Stainless Steel Butterfly Valve Rust When In Use?

图片
Stainless steel butterfly valves will appear rusty when they are in use. Many friends don't know what caused it. Today the butterfly valve manufacturer will tell you about this problem. Let's learn about it with the   Butterfly Valve Supplier . Stainless steel butterfly valve will rust during use. Through metallographic analysis, dyeing test, heat treatment test, SEM and other tests, it is found that the key factor for material corrosion is the precipitation of carbides along the grain boundaries to form chromium-depleted areas, which causes the stainless steel butterfly valve to rust. Material CF8M stainless steel butterfly valve rusts during use. After austenitic stainless steel undergoes normal heat treatment, its structure should be austenite at room temperature, and its corrosion resistance is very good. Analyze the cause of butterfly valve corrosion. Butterfly Valve The stainless steel butterfly valve material is nickel-chromium austenitic stainless steel, which is usuall
阅读全文

flange check valve

图片
Ball check valve Product Description  of flange check valve DIN3202 F6 Ball Check Valve   Standard Design standard DIN3202 F6 Flange drilling standard EN1092-2 PN10,PN16,PN25 Face to face standard EN558-1 Series 48 Hydraulic test standard EN1074-1 and 2 /EN12266 Main Raw Material  of silent check valve Body Ductile Iron Bolt Stainless Steel Ball Steel/DI+NBR Washer Stainless Steel O-ring NBR Washer PTFE Bonnet Ductile Iron Plug Galvanized Steel
阅读全文