BS5163 Resilient Seated Gate Valve

BS5163 Resilient Seated Gate Valve

Big Size Gate Valve Features

The ductile iron core is fully vulcanized with EPDM rubber, no iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber.

Guides in the wedge and on the valve body ensure a uniform closure, safe operation ensured as the guides prevent overloading of the stem.

Stainless steel stem with rolled threads for high strength.

The valve can replace stem seals under pressure.

Full bore.

Body inside and outside fusion bonded epoxy coating with excellent corrosion resistant performance.

Big Size Gate Valve Standard

Design standard

BS5163, EN1171

Flange drilling standard

EN1092-2 PN10/PN16

Face to face standard

EN558-1 Series 3

Hydraulic test standard

EN1074-1 and 2 /EN12266

 

Seat:1.1*PN(in bar), Body:1.5*PN(in bar)

评论

发表评论

此博客中的热门博文

What is Gate valves

图片
  What is Gate valves Gate valves  are widely used for all types of applications and are suitable for both above-ground and underground installation. Not least for underground installations it is paramount to choose the right type of valve to avoid high replacement costs. Gate valves are used to shut off the flow of liquids rather than for flow regulation. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low flow resistance. The size of the open flow path generally varies in a nonlinear manner as the gate is moved. This means that the flow rate does not change evenly with stem travel. Depending on the construction, a partially open gate can vibrate from the fluid flow Gate valves are mostly used with larger pipe diameters (from 2" to the largest pipelines) since they are less complex to construct than other types of valves in large sizes. Gate Valve Parts Main gate valve parts of a gate valve are: body, seat, gate, stem, bonnet and act
阅读全文

Why Does Stainless Steel Butterfly Valve Rust When In Use?

图片
Stainless steel butterfly valves will appear rusty when they are in use. Many friends don't know what caused it. Today the butterfly valve manufacturer will tell you about this problem. Let's learn about it with the   Butterfly Valve Supplier . Stainless steel butterfly valve will rust during use. Through metallographic analysis, dyeing test, heat treatment test, SEM and other tests, it is found that the key factor for material corrosion is the precipitation of carbides along the grain boundaries to form chromium-depleted areas, which causes the stainless steel butterfly valve to rust. Material CF8M stainless steel butterfly valve rusts during use. After austenitic stainless steel undergoes normal heat treatment, its structure should be austenite at room temperature, and its corrosion resistance is very good. Analyze the cause of butterfly valve corrosion. Butterfly Valve The stainless steel butterfly valve material is nickel-chromium austenitic stainless steel, which is usuall
阅读全文

flange check valve

图片
Ball check valve Product Description  of flange check valve DIN3202 F6 Ball Check Valve   Standard Design standard DIN3202 F6 Flange drilling standard EN1092-2 PN10,PN16,PN25 Face to face standard EN558-1 Series 48 Hydraulic test standard EN1074-1 and 2 /EN12266 Main Raw Material  of silent check valve Body Ductile Iron Bolt Stainless Steel Ball Steel/DI+NBR Washer Stainless Steel O-ring NBR Washer PTFE Bonnet Ductile Iron Plug Galvanized Steel
阅读全文