Hebei Huahui Valve Co., Ltd

The check valve is a control component in the pipeline fluid conveying system. It is used to change the section of the passage and the direction of the medium flow. It has the functions of diversion, cutoff, throttling, check, diversion or overflow pressure relief. The check valve is unavoidable under long-term work, but if we maintain it, it can be used for a longer time. Share 13 small details with everyone to pay attention to, so that your check valve will last longer. As a   Ball Check Valve Leading Supplier , share with you. Multi-function Check Valve 1. Pay attention to the storage environment of check valves. They should be stored in a dry and ventilated room, and both ends of the passage should be blocked. 2. The check valve should be checked regularly, the dirt on it should be removed, and the anti-rust oil should be smeared on its surface. 3. The check valve after installation and application should be checked and repaired regularly to ensure its normal operation. 4. Check wh

  DIN F4 Gate Valve 1. Electrochemical corrosion If the surface of the stainless steel gate valve has some other metal element powders or other attachments of foreign metal particles, these powders and attachments in the humid air will interact with the condensed water in the stainless steel to produce a micro battery. In turn, an electrochemical reaction is initiated, which causes rust on the surface. 2. Organic liquid adheres to the surface Sometimes if there is some organic liquid on the surface of the stainless steel gate valve, it will form an organic acid in the presence of water and oxygen, and this organic acid will have a corrosive effect on the surface of the metal, so rust will appear on the surface. Or the surface of the stainless steel gate valve has some acid, or alkaline substances and salt substances, which can also cause rust on the surface. 3. Polluted air If the air is polluted, the air contains a lot of sulfide or carbon oxide, nitrogen oxide and other gases. These

For stainless steel gate valves, I believe many people are familiar with them. They often see them in life. They feel that they will not rust, but some have rust. For this reason, many people do not understand. Think it is a quality problem, so what is going on? Is it a quality problem? As a   Gate Valve Supplier , share with you. In fact, the reasons for the rust on the surface of the stainless steel gate valve are as follows. DIN F4 Gate Valve 1. Electrochemical corrosion If the surface of the stainless steel gate valve has some other metal element powders or other attachments of foreign metal particles, these powders and attachments in the humid air will interact with the condensed water in the stainless steel to produce a micro battery. In turn, an electrochemical reaction is initiated, which causes rust on the surface. 2. Organic liquid adheres to the surface Sometimes if there is some organic liquid on the surface of the stainless steel gate valve, it will form an organic acid in

Gate valve refers to a valve whose closing member (gate) moves along the vertical direction of the channel axis. It is mainly used as a shut-off medium in the pipeline, that is, fully open or fully closed. Generally, gate valves cannot be used for throttling. It can be used in high temperature and high pressure, and can be used in a variety of different media. Gate valves are generally not used in pipelines that transport mud and viscous fluids. Today, the   Gate Valve Leading Manufacturer  is here. What are the advantages of the popular science gate valve? DIN F5 Gate Valve The advantages of gate valves are as follows: ①　The fluid resistance is small; ②　The torque required for opening and closing is small; ③　 can be used in the ring network pipeline where the medium flows in two directions, that is to say, the flow direction of the medium is not restricted; ④　When fully open, the erosion of the sealing surface by the working medium is smaller than that of the stop valve; ⑤　The shape